跳转到主内容

E-Series ST8000NM018B驱动器故障、并发生断言风暴

Views:
6
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
sgrid
Last Updated:

适用场景

  • NetApp E 系列
  • StorageGRID设备
  • 驱动器型号:ST8000NM018B
  • 驱动器固件:NE01

问题描述

  • ST8000NM018B驱动器因写入失败而出现故障。E-Series软件会记录226c 驱动器故障事件。

B:9/4/23, 12:20:45 AM (00:20:45) 4890 226c Drive failure - Shelf 0, Drawer 5, Bay 9 - Cause: 3 = Write failure; Drive WWN: 5000c500f0XXXXXX; SN: WRQ1LKEQ00XXXXXXXXXX <--CRITICAL

  • 发生故障后,立即记录驱动器返回检查条件事件100A,表示驱动器遇到断言风暴(Sense Key / ASC/ASCQ:2/4/f2 )

B:9/4/23, 12:20:48 AM (00:20:48) 4893 100a Drive returned CHECK CONDITION - Shelf 0, Drawer 5, Bay 9
---->Sense 2/4/f2 = Not Ready - Logical unit not ready, assert storm threshold being exceeded - CDB: 0x1b = Start/Stop Unit - LBA: 0x17f000040f8ca58

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.