跳转到主内容

单个存储节点显示"Storage Appliance link down on network port"警报

Views:
1
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
esg
Last Updated:

适用场景

  • NetApp StorageGRID
  • StorageGRID设备

问题描述

StorageGRID会storage appliance link down on network port <port> 在发生网络相关事件后报告 。

  • 网络连接恢复后,StorageGRID >存储节点>网络中将显示该端口:

示例:

单个存储节点显示"Storage Appliance link down on network port"警报

  • 即使网络恢复、仍会报告Storage appliance link down on network port 警报。

网络端口上的存储设备链路关闭

  • 通过SSH会话运行cat /sys/class/net/hic*/carrier 时、 受影响节点的状态为0

网络端口上的存储设备链路关闭

  • 运行ip addr show 命令时、受影响的端口是 受影响节点上的DOWN

4: hic1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond1 state UP group default qlen 1000
   link/ether d0:39:ea:13:a6:db brd ff:ff:ff:ff:ff:ff
5: hic2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq master bond0 state DOWN group default qlen 1000
   link/ether d0:39:ea:13:a6:dc brd ff:ff:ff:ff:ff:ff

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.