重新初始化失败的SRAM转储会使适配器脱机

最后更新
另存为PDF

Views:: 2

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: san<a>2009512195</a>

Last Updated:

适用场景

ONTAP 9.x

问题描述

EMS日志报告 reinitialization failed：

Thu Mar 16 16:59:55 -0400 [SAN01: fct_tpd_thread_3: scsitarget.fcp.dump:debug]: FCP target SRAM dump generated for adapter 1d, FW Initiated Dump

Thu Mar 16 16:59:55 -0400 [SAN01: fct_tpd_thread_3: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 1d. The adapter will be automatically reset to clear the status:0x87000000, status1:0x742f, status2:0x0, DIP:1, RN:1, RDY:0, Dump owner:3 condition.

Thu Mar 16 16:59:55 -0400 [SAN01: fct_tpd_thread_2: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 1c. The adapter will be automatically reset to clear the status:0x87000000, status1:0x742f, status2:0x0, DIP:1, RN:1, RDY:0, Dump owner:3 condition.

Thu Mar 16 17:00:56 -0400 [SAN01: fct_tpd_thread_3: fcp.io.status:debug]: STIO Adapter 1d resetting with 5 ITNs and 6 commands to drain

Thu Mar 16 17:01:26 -0400 [SAN01: fct_tpd_thread_3: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 1d. The adapter will be automatically reset to clear the port offline failed, rc:-1 condition.

Thu Mar 16 17:01:57 -0400 [SAN01: fct_tpd_thread_2: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 1c. The adapter will be automatically reset to clear the status:0x87000000, status1:0x742f, status2:0x0, DIP:1, RN:1, RDY:0, Dump owner:3 condition.

Thu Mar 16 17:02:00 -0400 [SAN01: fct_tpd_thread_3: fcp.io.status:debug]: STIO Adapter 1d reinitialization failed, saving RAS trace data.

Depletion of Driver MQ condition EMS日志中报告的错误：

Thu Nov 30 12:24:56 0000 [efnexxxb-n2: fct_tpd_thread_0: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 2a. The adapter will be automatically reset to clear the Depletion of Driver MQ condition. Thu Nov 30 12:24:56 0000 [efnexxxb-n2: fct_tpd_thread_0: fcp.io.status:debug]: STIO Adapter 2a resetting with 0 ITN and 0 commands to drain. Thu Nov 30 12:24:56 0000 [efnexxxb-n2: fct_tpd_thread_1: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 2b. The adapter will be automatically reset to clear the Depletion of Driver MQ condition.

端口状态显示 OFFLINED BY SYSTEM

slot 2: Fibre Channel Target Host Adapter 2a (Emulex LPe32000 (LPe32004) rev. 12, <OFFLINED BY SYSTEM>) Board Name: 111-0xx48 Serial Number: FP1046xx14 Firmware rev: 12.2.390.0 Host Port Addr: 000000 FC Nodename: 50:0a:0x:8x:8x:cx:4e:35 (500a0x8x8xcx4e35) FC Portname: 50:0a:0x:8x:8x:cx:4e:35 (500a0x8x8xcx4e35) Connection: No link Switch Port: sgs2xx11:16 SFP Vendor Name: AVAGO (Warning: SFP info not updated when port is OFFLINE) ... SFP Capabilities: 8, 16, 32 Gbit/Sec