跳转到主内容

SnapDrive for Windows 无法在 vSphere 6.5 中挂载 RDM LUN ,因为路径限制为 1024 - 无法通过原始设备映射添加虚拟磁盘

Views:
64
Visibility:
Internal
Votes:
0
Category:
snapdrive-for-windows
Specialty:
snapx
Last Updated:

适用于

SnapDrive for Windows 7.1.4/7.1.5
VMware vSphere 6.5

问题

尝试使用 SnapDrive for Windows 挂载 RDM LUN 失败,并生成错误 

Failed to create disk in virtual machine, Failed to Map virtual disk: The ESX cannot have more than 1024 paths.

查看 SnapDrive 调试日志可显示类似于以下内容的条目:

05/08-14:55:46.815   PID:7184   TID:2232   FCPVdisk.cpp@4121      Failed to Add the virtual Disk through raw device mapping, , error code: '0x80004005', error description: 'Failed to Map virtual disk: The ESX cannot have more than 1024 paths'
05/08-14:55:46.815   PID:7184   TID:2232   FCPVdisk.cpp@4123      Failed to create disk in virtual machine, Failed to Map virtual disk: The ESX cannot have more than 1024 paths.
 HRESULT 0xc00403e3.


查看 VirtualizationAPI 日志可显示类似于以下内容的条目:

VirtualizationAPILog Critical: 1 :   05/08-15:02:33.190  PID:9516  TID:8728 @-1  CEsxServer::GetLunInformation()  Name : COMException Message : The ESX cannot have more than 1024 paths Trace :   at VirtualizationAPI.CEsxServer.GetLunInformation(String strLunSerialNo, UInt32 nLunId, String& strDeviceName, String& strLUNuuid, EnumAdapterType eAdapterType, String strInitiatorName)
VirtualizationAPILog Critical: 1 :   05/08-15:02:33.190  PID:9516  TID:8728 @-1  CEsxServer::MapVirtualDisk() -  Name : COMException Message : The ESX cannot have more than 1024 paths Trace :   at VirtualizationAPI.CEsxServer.GetLunInformation(String strLunSerialNo, UInt32 nLunId, String& strDeviceName, String& strLUNuuid, EnumAdapterType eAdapterType, String strInitiatorName)
  at VirtualizationAPI.CEsxServer.MapVirtualDisk(String strLunSerialNo, UInt32 nLunId, String strDataStoreName, String strFilerName, UInt64 nSizeInKB, Boolean bRDMFileSpecified, String strRDMFileName, Boolean bShared, EnumAdapterType eAdapterType, String strInitiatorName, UInt32& nControllerKey)Datastore :<DS ID>


review 窗口的应用程序事件日志会显示类似于以下内容的条目:

Event ID 1120 
The following information was included with the event: 


/vol/volumename/
HTTPS

X
X
Failed to create disk in virtual machine, Failed to Map virtual disk: The ESX cannot have more than 1024 paths.

Failure in connecting to the LUN

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange