跳转到主内容

升级到Data ONTAP 8.3而不禁用32位数据支持会导致启动时出错

Views:
17
Visibility:
Public
Votes:
0
Category:
data-ontap-8
Specialty:
core<a>1006888</a>
Last Updated:

适用场景

  • Data ONTAP 8.3

问题描述

  • 在升级到集群模式Data ONTAP 8.3时、节点会在重新启动后暂停并显示一条32位错误消息:
    • 示例
      ALERT:
      The currently running image on this node contains obsolete capabilities which are in use by the cluster.
      These capabilities must be disabled cluster-wide using the following per-capability instructions before this node can boot:

      format_32bit: You must remove all 32-bit data from the cluster and disable the 32-bit aggregate support using "storage aggregate 64bit-upgrade 32bit-disable" command (privilege advanced).
    • 注意
      •  Storage aggregate 64bit-upgrade 32bit-disable -force 只能在Data ONTAP 8.2.x中使用
      • 如果存储系统已升级到Data ONTAP 8.3,则会显示以下错误:
        storage aggregate 64bit-upgrade 32bit-disable –force” command is unrecognized

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.