跳转到主内容

无法在 vFiler 单元上新创建的卷上激活配额

Views:
34
Visibility:
Public
Votes:
2
Category:
data-ontap-7
Specialty:
7dot
Last Updated:

适用场景

Data ONTAP 7-模式

问题描述

尝试在新创建的 vFiler 卷上激活配额时,系统会报告如下故障:

fas3070-ams2*>version
NetApp Release 8.0P2 7-Mode: Tue Jun 29 15:10:09 PDT 2010
fas3070-ams2*>

fas3070-ams2*>vol create nabil aggr0 500M
Creation of volume 'nabil' with size 500m on containing aggregate
'aggr0' has completed.

fas3070-ams2*>vfiler create nabil_vfiler -i 10.64.20.227 /vol/nabil
Wed Jan 12 12:31:57 CET [nabil_vfiler@useradmin.added.deleted:info]: The role 'compliance' has been added.
Wed Jan 12 12:31:57 CET [nabil_vfiler@export.file.backup.notDone:warning]: Could not read from file /etc/exports.
Wed Jan 12 12:31:57 CET [nabil_vfiler@export.file.missing:warning]: Could not open '/etc/exports' for reading.
Wed Jan 12 12:31:57 CET [nabil_vfiler@cmds.vfiler.info:notice]: vFiler unit nabil_vfiler initialized.
The etc configuration directory for vfiler "nabil_vfiler" is /vol/nabil/etc.

Setting up vfiler nabil_vfiler
Configure vfiler IP address 10.64.20.227? [y]:
Interface to assign this address to {e0a, e0b, e0c, e0d}: e0a
Netmask to use: [255.255.0.0]:
The administration host is given root access to the filer's
/etc files for system administration.  To allow /etc root access
to all NFS clients enter RETURN below.
Please enter the name or IP address of the administration host: 10.0.0.0/8
Please enter the IP address for 10.0.0.0/8:0.0.0.0
Do you want to run DNS resolver? [n]:
Do you want to run NIS client? [n]:
e0a: flags=0x2f4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
 inet 10.64.20.215 netmask 0xffff0000 broadcast 10.64.255.255
 ether 00:a0:98:0c:95:07 (auto-1000t-fd-up) flowcontrol full
Default password for root on vfiler nabil_vfiler is "".
New password:
Retype new password:
Do you want to setup CIFS? [y]: n
fas3070-ams2*>

fas3070-ams2*>vfiler status
vfiler0                          running
vf1                              running
vfiler1                          running
nabil_vfiler                     running
fas3070-ams2*>

fas3070-ams2*>rdfile /vol/nabil/etc/quotas      
#Auto-generated by setup Wed Jan 12 12:31:57 CET 2011

- Let see the failure if we try to activate quotas right now:

fas3070-ams2*> vfiler status
vfiler0                          running
vf1                              running
vfiler1                          running
nabil_vfiler                     running
fas3070-ams2*>

fas3070-ams2*>vfiler run nabil_vfiler quota on /vol/nabil
===== nabil_vfiler
quota: Starting quota initialization.
(Execute 'quota status' or 'quota status nabil' for status.)
fas3070-ams2*> quota: /etc/quotas contains no entries for volume nabil
fas3070-ams2*>

fas3070-ams2*>vfiler run nabil_vfiler quota status      
===== nabil_vfiler
nabil: quotas are off.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.