跳转到主内容

无法访问单模式 VIF : VIF 状态报告单模式 VIF 已中断

Views:
33
Visibility:
Public
Votes:
0
Category:
data-ontap-7
Specialty:
network
Last Updated:

状态信息

适用场景

Data ONTAP 7

问题描述

  • 二级 VIF 状态显示为“Broke
  • 在“vif status”输出中,“Strike Count”表示“10 of 10”:
    vifSingle: 2 links, transmit 'none', VIF Type 'single_mode' fail 'default'
         VIF Status    Broke   Addr_set
        up:
            member1: state up, since 08Apr2011 07:01:55 (3+01:49:14)
                    mediatype: auto-1000t-fd-up
                    flags: enabled
                    input packets 8818, input bytes 564352
                    output packets 110, output bytes 4620
                    output probe packets 70, input probe packets 0
                    strike count: 10 of 10
                    up indications 1, broken indications 0
                    drops (if) 0, drops (link) 0
                    indication: up at 08Apr2011 06:54:57
                            consecutive 266185, transitions 21
            member2: state up, since 08Apr2011 07:01:54 (3+01:49:15)
                    mediatype: Enabled virtual interface
                    flags: enabled favored
                    input packets 0, input bytes 0
                    output packets 233, output bytes 11548
                    output probe packets 140, input probe packets 0
                    strike count: 10 of 10
                    up indications 1, broken indications 0
                    drops (if) 0, drops (link) 0
                    indication: up at 08Apr2011 07:01:55
                            consecutive 266185, transitions 1

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.