H610S节点脱机Vol_CPU1_ABC电压下限严重

最后更新
另存为PDF

Views:: 11

Visibility:: Public

Votes:: 0

Category:: h-series<a>2009年397142</a>

Specialty:: hci

Last Updated:

适用场景

NetApp H610S
NetApp Element软件 12.3.0.958或更低版本

问题描述

节点脱机且ping不可用、BMC WebUI也无法访问。(也可能在从12.3.0升级到12.7的过程中发生)
断电后、节点仍无法启动、并显示黑色TUI屏幕、从BMC WebUI中、日志如下所示：

[Crtical] [NM Status] [Management Subsystem Health] Controller access degraded or unavailable Self-Test Result:0x57 0x02 - Asserted [Critical] [Volt_CPU1_ABC] [Voltage] Lower Critical - Going Low (Reading: 0.028 Volts/ Threshold: 1.078 Volts) - Asserted [Critical] [SPS FW Health] [OEM] Firmware Status - Image Execution Failed - Asserte [Warning] [SPS FW Health] [OEM] Firmware Status - UMA Operation Error - Asserted [Critical] [CATERR] [Processor] IERR - Asserted [Critical] [CATERR] [Processor] IERR - Asserted