跳转到主内容

H410S—所有块驱动器同时标记为可用

  1. 最后更新
  2. 另存为PDF
Views:
2
Visibility:
Public
Votes:
0
Category:
h-series
Specialty:
hci
Last Updated:

适用场景

  • NetApp H410S
  • NetApp Element软件

问题描述

  • 5个块驱动器 driveAvailable 同时标记为driveAvailable  并显示警报：
    • unresponsiveService A block service is not responding.
    • blockServiceUnhealthy A block service is unhealthy and SolidFire is attempting to migrate data away from it.
    • blocksDegraded Only a single complete copy of the block data is accessible. Restore any offline nodes or block services or contact support for assistance.
    • driveAvailable Node ID x has 5 available drive(s).
  • kener.log 显示一个磁盘的开头具有问题描述、并尝试中止任务、但命令超时。
kernel: [24953222.840340] sd 10:0:2:0: attempting task abort! scmd(000000006f5d996c)
kernel: [24953222.840347] sd 10:0:2:0: [sdd] tag#56 CDB: Read(10) 28 00 6b ad 59 77 00 00 01 00
kernel: [24953222.840351] scsi target10:0:2: handle(0x000b), sas_address(0x4433221102000000), phy(2)
kernel: [24953222.840354] scsi target10:0:2: enclosure logical id(0x50030480208d3538), slot(2) 
kernel: [24953222.840356] scsi target10:0:2: enclosure level(0x0000), connector name(   )
kernel: [24953252.980425] mpt3sas_cm0: Command Timeout 
 
  • 然后重置了ms3sas驱动程序、并且此节点上的所有磁盘均已重置。
kernel: [24953263.220456] mpt3sas_cm0: sending diag reset !!
kernel: [24953264.278496] mpt3sas_cm0: diag reset: SUCCESS
 
kernel: [24953272.191933] sd 10:0:2:0: task abort: SUCCESS scmd(000000009c002114)
kernel: [24953272.191940] sd 10:0:3:0: task abort: SUCCESS scmd(00000000ca20899d)
kernel: [24953272.191948] sd 10:0:5:0: task abort: SUCCESS scmd(00000000e4699520)
kernel: [24953272.191970] sd 10:0:4:0: task abort: SUCCESS scmd(000000001cbae666)
kernel: [24953272.191978] sd 10:0:1:0: task abort: SUCCESS scmd(0000000021813309)
kernel: [24953272.191985] sd 10:0:0:0: task abort: SUCCESS scmd(00000000eaadeeed)
 
kernel: [24953272.565518] sd 10:0:0:0: Power-on or device reset occurred
kernel: [24953272.565528] sd 10:0:1:0: Power-on or device reset occurred
kernel: [24953272.565552] sd 10:0:2:0: Power-on or device reset occurred
kernel: [24953272.565577] sd 10:0:3:0: Power-on or device reset occurred
kernel: [24953272.565609] sd 10:0:4:0: Power-on or device reset occurred
kernel: [24953272.565634] sd 10:0:5:0: Power-on or device reset occurred

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.