跳转到主内容

计算POST停止并显示故障DIMM消息、并将大小显示为0MiB

Views:
8
Visibility:
Public
Votes:
0
Category:
solidfire-chassis<a>计算节点</a><a>h410x</a><a>的DIMM发生故障</a>
Specialty:
hci
Last Updated:

适用场景

NetApp HCI 计算节点

问题描述

打开HxxxC计算节点电源后、启动序列将停止并显示以下消息:

(runtime)Failing DIMM: DIMM location and Mapped-Out P2-DIMME2

clipboard_e9ca872a181a84cfb43d3e4561bd76c7f.png

在系统/硬件信息/DIMM选项卡下、从节点BMC-IPMI设置中检查故障DIMM状态时、  报告的大小为0 MiB、而不是实际大小(例如32 GB、64 GB)

P2-DIMME2

P2-DIMME2
Max Capable Speed: 2666 MHz
Operating Speed: 2666 MHz
Size: 0 MiB
Serial No.: 
Part No.: 
Manufacturer: 
Manufacturer: NetApp
Product Name: HxxxC
Serial No.: 
Firmware Revision:   
Firmware Build Time:   
BIOS Version: 
System BIOS Build Time: 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.