跳转到主内容

升级到 Element 后,网络和 BIOS 固件版本不匹配 12.3.

Views:
9
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

适用场景

  • NetApp H610S
  • NetApp Element 软件 12.3

问题描述

在 Element 12.3 升级 H610S 节点后,出现 on NetApp SolidFire Active IQ :

  • NETWORK_FIRMWARE_VERSION_ETH1 should be >= 14.25.1020 (MT_2420110034) BUT IS 14.22.1002
  • NETWORK_FIRMWARE_VERSION_ETH0 should be >= 14.25.1020 (MT_2420110034) BUT IS 14.22.1002
  • BIOS_VERSION should be >= 3B06 but is 3B03

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.