在节点降级或更换 RMA 后、 NetApp H610s 会发出 NETWORK_Firmware_Version Mismatch 警报

最后更新
另存为PDF

Views:: 23

Visibility:: Public

Votes:: 0

Category:: h-series

Specialty:: solidfire

Last Updated:

适用于

NetApp Element 软件 10.4
NetApp H610S

问题

在降级（通常在向集群添加新节点或更换 RMA 时） H610s 节点后会生成警报，指出当前 NIC 固件高于预期并支持此版本的元素，如下所示；

NETWORK_FIRMWARE_VERSION_ETH0 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034) NETWORK_FIRMWARE_VERSION_ETH1 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)

注：NetApp H610S has NETWORK FIRMWARE VERSION Mismatch alert After Node Downgrade or Replacement#Additional_Information有关警报的完整说明，请参见其他信息。