跳转到主内容

根据最后的结果、数据存储库的性能是否得到了充分利用?

Views:
5
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

适用场景

  • NetApp HCI
  • NetApp Element软件

问题解答

根据以下测试结果、队列深度为32的随机4K块的IOPS已达到最大IOPS设置、因为数据存储库的性能正在得到充分利用。
 
  • 使用 C截至DiskMark的测试结果:
[Read]
SEQ   1MiB (Q=  8, T= 1):  108.850 MB/s [   103.8 IOPS] < 75984.38 us>
SEQ   1MiB (Q=  1, T= 1):  109.884 MB/s [   104.8 IOPS] <  9421.66 us>
RND   4KiB (Q= 32, T= 1):   64.708 MB/s [  15797.9 IOPS] <  1997.21 us>
RND   4KiB (Q=  1, T= 1):   13.392 MB/s [  3269.5 IOPS] <  304.87 us>
 
[Write]
SEQ   1MiB (Q=  8, T= 1):  108.430 MB/s [   103.4 IOPS] < 76479.92 us>
SEQ   1MiB (Q=  1, T= 1):  106.540 MB/s [   101.6 IOPS] <  9833.93 us>
RND   4KiB (Q= 32, T= 1):   67.078 MB/s [  16376.5 IOPS] <  1945.33 us>
RND   4KiB (Q=  1, T= 1):   9.039 MB/s [  2206.8 IOPS] <  452.15 us>
 
  • 卷IOPS设置:
最小IOPS 50
最大IOPS 15000★
突发IOPS 15000
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.