跳转到主内容

如何将SolidFire 节点添加到不使用巨型帧的集群?

Views:
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
hci<a>2008983655</a>
Last Updated:

适用场景

  • NetApp Element 软件
  • NetApp HCI
  • NetApp H410S

问题解答

  • 请按照正常的SolidFire 集群扩展过程进行操作
  • 在节点网络配置步骤5期间设置MTU 1500

追加信息

节点添加过程(不使用NDE Scal):
  1. 在机箱中安装新节点和驱动器
    请参见安装H系列硬件
  2. 为节点布线、连接显示器/键盘
  3. 打开节点电源并配置BMC (IPMI)网络设置
  4. 节点将启动至TUI菜单。可以通过远程IPMI控制台执行后续步骤(如果已配置BMC网络)
  5. 配置管理和存储接口、主机名并输入存储集群名称(区分大小写)。将MTU设置为1500
  6. 将新节点添加到集群:cluster web图形用户界面 > Cluster > Nodes > Available > Actions (For the regarding node, Gear Icon on the right side) > Add
  7. 在新节点处于活动状态(GUI >集群>节点)后、将可用驱动器添加到集群
    请先添加块驱动器、同步完成后、添加剩余的元数据驱动器(插槽0)
    请参见如何在Element上的集群中添加或删除驱动器
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.