跳转到主内容

HCI 上 Mellanox 25GbE 端口的默认 FEC 模式是什么？

  1. 最后更新
  2. 另存为PDF
Views:
60
Visibility:
Public
Votes:
2
Category:
netapp-hci
Specialty:
hci
Last Updated:

适用场景

H610

问题解答

H610 上的 25GbE 端口是 Mellanox ConnectX-4 Lx 以太网适配器。根据 Mellanox 社区文章， FEC 模式默认为自动协商。如果另一端支持 FEC ，则会启用 FEC 。否则， FEC 将被禁用。

追加信息

Mellanox ConnectX-4 Lx 以太网适配器支持的 FEC 模式为 AU （自动） /nF （无 FEC ） /FFC （ FireCode FEC ） / RS （ RS-FEC ）

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.