跳转到主内容

在计划内断电期间正常关闭和启动 AVA 的过程是什么?

Views:
36
Visibility:
Public
Votes:
0
Category:
altavault
Specialty:
dp
Last Updated:

适用于

  • AltaVault

解答

执行以下步骤以关闭 AltaVault 电源、为计划停电做好准备:

  1. 使用 CLI/WebUI
    CLI 关闭 AltaVault :
      > enable
      # reload halt


    WebUI :
    AltaVault :设置 > 重新启动 / 关闭
  2. 断开电源线,断开 AltaVault 机头的电源。  设备将在重新接通电源时自动启动,如果在维护期间断电,此步骤将阻止设备启动。
  3. 使用每个电源电缆上方的摇臂开关断开每个扩展架电源的电源。

请执行以下步骤在计划断电后打开 AltaVault :

  1. 重新接通所有扩展架的电源并等待 10 秒。
  2. 重新接通 AltaVault 机头的电源。系统将自动启动、启动可能需要 30 分钟。
  3. 登录 AltaVault 并验证系统是否运行正常。

其他信息

附加信息 _text

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.