跳转到主内容

我是否可以遵循包含不受支持版本的Cisco集群交换机升级路径？

  1. 最后更新
  2. 另存为PDF
Views:
2
Visibility:
Public
Votes:
0
Category:
thirdparty<a>2008688714</a><a>进行翻译</a>
Specialty:
hw
Last Updated:

适用场景

  • Cisco集群或存储交换机
  • ONTAP 9

问题解答

是有时、要安装目标版本的NX-OS固件、必须先升级到中间固件版本。只要您的ONTAP 版本和其他组件支持起始版本和目标版本、就可以临时安装和运行不受支持的版本以进行进一步升级。

 
首先将所有固件升级应用于一个集群交换机。然后、将所有固件升级应用于另一个集群交换机。

追加信息

不适用

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.