跳转到主内容

无法清除网络端口上的存储设备链路关闭警报

Views:
Visibility:
Public
Votes:
0
Category:
storagegrid<a>20090101010</a>
Specialty:
esg
Last Updated:

适用场景

  • StorageGRID 11.5
  • StorageGRID SG1000
  • StorageGRID SG6000
  • StorageGRID SG5700

问题描述

  • 存在与此警报网络HIC端口相关的一些网络问题描述。
  • 网络问题描述 恢复后、受影响的端口 从图形用户界面启动

Grid20220316.jpg

  • Storage appliance link down on network port 警报仍然存在。

Grid2022031601.jpg

  • 运行 cat /sys/class/net/hic*/carrier 命令、状态 0来自受损节点。

Grid2022031602.jpg

  • 使用 ifconfig ethtool 验证错误的来源、请参考: NRER错误会不断报告
    • 运行 ifconfig 、然后检查中每个项上的端口状态和错误计数器RX errors,dropped,overruns,frame
      • 正常端口:hic1:flags=4098<up、broadcast、running、slave、multicast > MTU 1500
      • 错误端口:hic2:flags=6211<up、broadcast、slave、multicast > MTU 1500-> without running state
  • 运行 ip addr show 命令、受影响的端口DOWN 来自受损节点。

#ip addr show

......
4: hic1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond1 state UP group default qlen 1000
   link/ether d0:39:ea:13:a6:db brd ff:ff:ff:ff:ff:ff
5: hic2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq master bond0 state DOWN group default qlen 1000
   link/ether d0:39:ea:13:a6:dc brd ff:ff:ff:ff:ff:ff

Scan to view the article on your device
CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support