跳转到主内容

StorageGRIDノードがレプリケートデータまたはイレイジャーコーディングデータに対してゼロまたは低すぎると報告する

環境

NetApp StorageGRID 11.x

問題

問題はグリッド機能に影響しないため、機能的には問題ありません。オーバーヘッドは 、次のいずれかの処理中に計算されます。

  1. 導入時にノードが作成されます。
  2. 拡張時のノード作成
  3. ノードのリカバリ:
  4. ノードのリブート
  5. アップグレード

のあと、1つ以上のObject Storeボリューム(RangeDB)の値で使用量がゼロまたは少なすぎると表示されます。

注: この状況は 、かなりの量のデータが取り込まれるまで気づかれないことがあります。

これは、次の1つまたは複数の例で識別できます。

  • StorageGRIDノードの[LDR]の概要で、個 々 のボリュームの[Replicated Data]と[EC Data]の値が一致していません。

StorageGRID ノードLDR

  • ハードウェア交換後のスペース使用量の減少

  • 1つのノードで使用済み容量の割合が異なる:

StorageGRID ノードから利用率が低すぎると報告されます

  • サイトごとのコピーILMルールを使用した場合、一方のサイトの使用率がもう一方のサイトよりも高くなっています。

StorageGRID ノードLDR

  • 使用量は、FabricPool構成内のONTAPから報告されるサイズとは異なります。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.