跳转到主内容

NetApp HCI 是否支持 Broadcom BES-53248 交换机?

Views:
4
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

适用于

  • NetApp HCI
  • Broadcom BS-53248 交换机

问题解答

目标卷Broadcom BES-53248 交换机不支持在不同交换机端口上使用单独的绑定模式。

其他信息

在管理指南中:

非冗余端口:不属于 VPC 的对等交换机上的端口(端口 P4 和 S4 )。VPC 接口和非冗余端口不能是同一 VLAN 的成员,即 VLAN 可能包含 VPC 接口,或者 VLAN 可能包含非冗余端口,但不能同时包含这两者。
 
在 VPC 接口上获取的 FDB 条目会在两个设备之间同步。如果所有 VPC 成员端口均已启动,则数据流量不会遍历对等链路。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.