跳转到主内容

由于 ipmitool 故障,升级期间发生 "CPLD 闪存失败 "

Views:
14
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

适用于

  • H610s
  • NetApp Element 软件从 11.7 或更早版本升级到 11.8 或更高版本

问题

  • 在 H610S 升级期间发生 FirmwareAbort 。

示例:

2020-11-04 02:08:17: Firmware 47%: Flashing firmware
2020-11-04 02:08:17: Warning: This step may take up to 30 minutes to complete. Do not interrupt the upgrade or power cycle the storage node during this step. Doing so may make the storage node unusable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
2020-11-04 04:00:06: FirmwareAbort 47%: [UnhandledError pid=6719 cmd=return ${rc}]

  • VGA 控制台的输出将报告如下错误。

示例:

[2020-11-04T03:55:03Z] Failed cmd=("ipmitool""bmc""info") timeout="10s" exit_codes=("124""124""124""124"
...

[2020-11-04T03:57:21Z] CPLD Flashing Failed!

[2020-11-04T03:57:26Z] [UnhandledError pid=6719 cmd=return ${rc}]
 :: sfrtfi_firmware.sh:1843 | firmware_chassis_flash
 :: sfrtfi_firmware.sh:1918 | check_firmware
 :: init:142 | main

  • 节点将关闭。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.