跳转到主内容

在故障排除期间、如果接口摆动、SolidFire 绑定10G将关闭

  1. 最后更新
  2. 另存为PDF
Views:
17
Visibility:
Public
Votes:
0
Category:
sf-series<a>SolidFire</a><a>ESXi</a><a>LACP</a><a>LACP单个</a><a>MtuCheckFailure</a>
Specialty:
solidfire
Last Updated:

适用场景

  • NetApp SolidFire
  • Mellanox 交换机
  • Cisco 交换机
  • VMware vSphere

问题描述

  • 在故障排除期间手动摆动eth0或eth1链路时、或者在维护或断电期间重新启动交换机时、存储节点会关闭
  • 这会导致对节点上托管的卷的部分访问或完全访问丢失
  • 有时、这也可能会在mtuCheckFailure NetApp SolidFire Active IQ 中触发错误

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.