跳转到主内容

eth2/eth3 fimware 版本应为 3.2d 0x80000b4b 1.1767.0 ,而不是 3.2d 0x80000b4b 1.1681.0

Views:
3
Visibility:
Public
Votes:
0
Category:
h-series<a>2008652458</a>
Specialty:
solidfire
Last Updated:

适用场景

H610s

问题描述

更换节点后,将检测到以下警报

nodeHardwareFault "Hardware fault ID 826 text=NETWORK_FIRMWARE_VERSION_ETH2 should be == 3.2d 0x80000b4b 1.1767.0 but is 3.2d 0x80000b4b 1.1681.0"
nodeHardwareFault "Hardware fault ID 827 text=NETWORK_FIRMWARE_VERSION_ETH3 should be == 3.2d 0x80000b4b 1.1767.0 but is 3.2d 0x80000b4b 1.1681.0"

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.