跳转到主内容

e0M 在 "network port show" 中关闭,但在 "sysconfig -a " 中启动

Views:
26
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9.7
  • AFF C190

问题描述

端口 e0M 在中显示为 down network port show ,但在中显示为 up sysconfig -a

 

Cluster-01::>network port show
  (network port show)

Node: Node01
                                                  Speed(Mbps) Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0M       Default      MGMT            down 1500  auto/-     -

 

 

Cluster-01::> node run -node node-01 -command sysconfig -a

    slot 0: Internal 10/100/1000 Ethernet Switch
      Wrench:             auto-1000t-fd-up
      Device Type:        88E6176
   slot 0: Gigabit Ethernet I210
      e0M MAC Address:    d0:39:ea:27:20:5f (auto-1000t-fd-up)

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.