跳转到主内容

Coming soon...New Support-Specific categorization of Knowledge Articles in the NetApp Knowledge Base site to improve navigation, searchability and your self-service journey.

X1146A 端口未联机

Views:
7
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

适用场景

  • MetroCluster IP
  • AFF A400
  • X1146A :双 40/100G 以太网 T62100-CR 卡
  • Cisco N3K-C3132Q-V

问题描述

  • 使用缆线连接到交换机时,端口仍处于关闭状态

sysconfig -a 输出

 slot 2: Dual 40/100G Ethernet T62100-CR e2a MAC Address: 00:07:43:66:29:90 (auto-unknown-fd-down) e2b MAC Address: 00:07:43:66:29:98 (auto-unknown-fd-down) Device Type: T6 2 Firmware Version: 1.24.12.0 Part Number: 110122860D0 Hardware Revision: 0 Serial Number: PT19210369 slot 3: Dual 40/100G Ethernet T62100-CR e3a MAC Address: 00:07:43:66:29:d0 (auto-unknown-fd-down) e3b MAC Address: 00:07:43:66:29:d8 (auto-unknown-fd-down) Device Type: T6 2 Firmware Version: 1.24.12.0 Part Number: 110122860D0 Hardware Revision: 0 Serial Number: PT19210366 
  • 已在中正确检测到卡 sysconfig -ac
 ::> system node run -node NodeA -command sysconfig -ac sysconfig: slot 1 OK: X1146A: Dual 40/100G Ethernet T62100-CR sysconfig: slot 2 OK: X1146A: Dual 40/100G Ethernet T62100-CR sysconfig: slot 3 OK: X1146A: Dual 40/100G Ethernet T62100-CR sysconfig: No shelf configuration errors detected. sysconfig: There are no configuration errors. 
  • 环回测试确认端口联机
  • 已测试使用替代光缆和铜缆的端口以排除错误 1411966
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device