跳转到主内容

Coming soon...New Support-Specific categorization of Knowledge Articles in the NetApp Knowledge Base site to improve navigation, searchability and your self-service journey.

单节点报告splog.sp.not.accessible

Views:
4
Visibility:
Public
Votes:
0
Category:
aff-series<a>BMC</a><a>API</a><a>服务处理器( SP )</a><a>服务器进程</a>
Specialty:
hw
Last Updated:

适用场景

  • 底板管理控制器( BMC )
  • 服务处理器 (SP)
  • BMC/SP API 服务
  • servproud 守护进程

问题描述

  • 一个节点向集群中其他节点的 SP/BMC 报告 servproc 连接问题。示例: 

[node_name_03: servprocd: splog.sp.not.accessible:error]: The SP on the remote node (node_name_01) is not accessible because of The Service Processor on node "node_name_01" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal, check that network ports are configured correctly and are functional (up). Then, try the command again..

[node_name_03: servprocd: splog.sp.not.accessible:error]: The SP on the remote node (node_name_02) is not accessible because of The Service Processor on node "node_name_02" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal, check that network ports are configured correctly and are functional (up). Then, try the command again..

  • 更新ONTAP 或SP/BMC固件后、可能会开始显示这些消息
  • 已在节点上重新启动 servproud 守护进程和 api-service
  • 在节点放大 LIF 和 BMC IP 之间, hw-assist ping 测试正常

     

    Sign in to view the entire content of this KB article.

    New to NetApp?

    Learn more about our award-winning Support

    Scan to view the article on your device