无法识别扩展NIC卡上的端口

最后更新
另存为PDF

Views:

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: hw

Last Updated:

适用场景

AFF-A250

问题描述

无法识别slot2上的Ehternet端口。

node01::> network port show

Node: node01-2 Ignore Speed(Mbps) Health Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status Status --------- ------------ ---------------- ---- ---- ----------- -------- ------ e0M Default bcd_mgmt up 1500 auto/1000 healthy false e0a Default - down 1500 auto/- - false e0b Default - down 1500 auto/- - false e0c Cluster Cluster up 9000 auto/25000 healthy false e0d Cluster Cluster up 9000 auto/25000 healthy false e1a Default - down 9000 auto/- - false e1b Default bcd_iscsi down 1500 auto/- - false e1c Default - down 1500 auto/- - false e1d Default - down 1500 auto/- - false e2a Default - down 9000 auto/- - false e2b Default bcd_iscsi down 1500 auto/- - false e2c Default - down 1500 auto/- - false e2d Default - down 1500 auto/- - false

node01::> network port show

Node: node01-2 Ignore Speed(Mbps) Health Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status Status --------- ------------ ---------------- ---- ---- ----------- -------- ------ e0M Default bcd_mgmt down 1500 auto/- - false e0a Default - down 1500 auto/- - false e0b Default - down 1500 auto/- - false e0c Cluster Cluster up 9000 auto/25000 healthy false e0d Cluster Cluster up 9000 auto/25000 healthy false e1a Default - down 9000 auto/- - false e1b Default bcd_iscsi down 1500 auto/- - false e1c Default - down 1500 auto/- - false e1d Default - down 1500 auto/- - false

node01::*> system node run -node * -command sysconfig -ac 2 entries were acted on.

Node: node01-1 sysconfig: slot 1 OK: X1152: 4p 25GbE RoCE SFP28 sysconfig: slot 2 OK: X1152: 4p 25GbE RoCE SFP28 sysconfig: No shelf configuration errors detected. sysconfig: There are no configuration errors.

Node: node01-2 sysconfig: slot 1 OK: X1152: 4p 25GbE RoCE SFP28 sysconfig: No shelf configuration errors detected. sysconfig: There are no configuration errors.