跳转到主内容

BMC 固件更新失败,并显示 " 文件描述符错误 "

Views:
62
Visibility:
Public
Votes:
2
Category:
aff-series
Specialty:
hw
Last Updated:

适用于

  • ONTAP 9.7P6
  • AFF-A400

问题

从 Data ONTAP 提示符更新基板管理控制器( BMC )固件失败。

  • 正在尝试从 ONTAP 提示符更新 BMC 固件。

示例:
cluster::*> system service-processor image update -node nodename -package BMC_FW_308-04013_13.3.zip
 
 Note: Firmware update will need to reboot the SP on completion. If your console
       connection is through the SP, it will be disconnected
       Do you want to proceed with the firmware update ? {y|n}: y
 SP firmware update has been successfully scheduled.

  • BMC 控制台日志显示更新因 " 文件描述符错误 " 而失败。

 [201208052740][IPMIMain][INFO]SET URL = http://xxx.x.x.xx:xxxxx/FW_BMC/CPMI_BMC.ima
 [201208052740][IPMIMain][INFO]SET PROTOCOL = 2
 [201208052740][IPMIMain][INFO]SET device = 0
 [201208052741][IPMIMain][INFO]SET image = 0
 [201208052741][IPMIMain][INFO]SET retry number = 5
 [201208052741][IPMIMain][INFO]SET Preserve = 2
 [201208052741][IPMIMain][INFO]url = http://xxx.x.x.x:xxxxx/FW_BMC/CPMI_BMC.ima
 [201208052741][IPMIMain][INFO]protocol = 2
 [201208052741][IPMIMain][INFO]device = 0
 [201208052741][IPMIMain][INFO]image = 0
 [201208052741][IPMIMain][INFO]retry = 5
 [201208052741][IPMIMain][INFO]preserve = 2
 [201208052741][IPMIMain][INFO]cmd to ex: /usr/local/bin/bmc update http://xxx.x.x.x:xxxxx/FW_BMC/CPMI_BMC.ima backup
 [201208052741][bmc][INFO]URL = http://xxx.x.x.xx:xxxxx/FW_BMC/CPMI_BMC.ima
 [201208052741][bmc][INFO]image = backup
 [201208052741][bmc][INFO]current_boot = 0
 [201208052741][bmc][INFO]Update: current=0 target=1 wipe=0 switch=0
 [201208052741][bmc][INFO]Update inactive via  http http://xxx.x.x.xx:xxxxx/FW_BMC/CPMI_BMC.ima
 
 Upgrade and preserve BMC config
 Download HTTP: http://xxx.x.x.xx:xxxxx/FW_BMC/CPMI_BMC.ima
 Connecting to xxx.x.x.xx:xxxxx(xxx.x.x.xx:xxxxx)
 wget: can't connect to remote host (xxx.x.x.xx): Bad file descriptor
 Download HTTP: Fail
 Download HTTP: http://xxx.x.x.xx:xxxxx/FW_BMC/CPMI_BMC.ima
 Connecting to xxx.x.x.xx:xxxxx (xxx.x.x.xx:xxxxx)
 wget: can't connect to remote host (xxx.x.xx.xx): Bad file descriptor
 Download HTTP: Fail
 Download HTTP: http://xxx.x.x.xx:xxxxx/FW_BMC/CPMI_BMC.ima
 Connecting to xxx.x.xx.xx:xxxxx (xxx.x.x.xx:xxxxx)
 wget: can't connect to remote host (xxx.x.x.xx): Bad file descriptor
 Download HTTP: Fail
 Error : 100%
 [201208052750][bmc][INFO]Remove /tmp/rom.ima
 
 Fail to update bmc

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.