跳转到主内容

控制器中的光纤GBIC损坏

Views:
6
Visibility:
Public
Votes:
0
Category:
aff-series<a>SFP</a><a>2009077557</a>
Specialty:
san
Last Updated:

适用场景

ONTAP

问题描述

  • FC故障排除后、主板嵌入式FC端口无法保持联机
  • 按照知识库文章"FC目标适配器端口链路已断开"中的故障排除步骤操作后、问题描述 仍显示
  • 在关闭交换机端口并使用新的或已知正常工作的设备进行备份时、会显示以下日志输出。 

PORT-5-IF_DOWN_BIT_ERR_RT_THRES_EXCEEDED: %$VSAN 1%$ Interface fc1/2 is down (Error disabled - bit error rate too high)
MODULE-4-MOD_WARNING: Module 1 (Serial number: ) reported warning fc1/2 due to MAC Bit error exceeded threshold in device
MODULE-4-MOD_WARNING: Module 1 (Serial number: ) reported warning fc1/2 due to MAC Bit error exceeded threshold in device
PORT-5-IF_DOWN_BIT_ERR_RT_THRES_EXCEEDED: %$VSAN 1%$ Interface fc1/2 is down (Error disabled - bit error rate too high)
PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/2 is down (Administratively down)

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device