跳转到主内容

AFF A250 已被接管,无法启动

Views:
17
Visibility:
Public
Votes:
3
Category:
aff-series<a>2009004208</a>
Specialty:
hw
Last Updated:

适用场景

  • AFF A250
  • AFF C250
  • FAS500f
  • ONTAP 9

问题描述

  • 节点发生panic (BMC system log console 输出中可能存在、也可能不存在)、如下所示:
PANIC: g_vfs_done(): rootfs.uzip read error - suspect boot device in process g_up on release 9.8P1 (C) on Thu Aug 26 04:05:54 UTC 2021
 
 
PANIC  : Process mgwd unresponsive for 159 seconds (mgwd startup: "(2219)")
  • 重新启动时、系统停留在BIOS处、 无法通过ApstIO设置实用程序启动
  • 启动期间会显示以下消息:
ERROR: Boot option loading failed

以及

md0.uzip: UZIP(zlib) inflate() failed
g_vfs_done():md0.uzip[READ(offset=360980480, length=8192)]error = 86
vm_fault: pager read error, pid 48638 (gzip) [retry 9]
ending in a PANIC:

  • BMC system log sel 指示看门狗2计时器中断/硬重置:

 264 | 02/03/2022 | 07:04:04 | Watchdog 2 #0x0f | Timer interrupt | Asserted
 265 | 02/03/2022 | 07:05:03 | Watchdog 2 #0x0f | Hard reset | Asserted
 266 | 02/03/2022 | 07:05:05 | Unknown #0x51 | State Asserted
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?