跳转到主内容

"storage port enable"命令失败、原因为"failed to determine whether port "Exx" on node "ABC" can be used as a storage port"

Views:
14
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

适用场景

  • AFF A700、AFF A800、AFF A400
  • ONTAP 9.6和9.7
  • 不支持RoCE的专用端口
  • 40G/100G以太网控制器CXV卡—NetApp部件号X1148A

问题描述

  • 使用命令配置不支持RoCE的专用端口以供存储使用 storage port enable失败、并显示以下错误

     示例:     

     Cluster::>storage port enable -node node1 -port e5b                                     
 
Failed to determine whether port "e5b" on node "node1" can be used as a storage port.
Wait a few minutes, then try the command again. 

  • 即使您在几分钟后尝试、该命令也无法成功执行。

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.