跳转到主内容

升级 Nexus 3132 集群网络交换机会导致其进入交换机启动提示符

Views:
24
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

适用于

  • Cisco Nexus 3000 系列交换机

问题

  • 将具有紧凑型或完整映像的 Nexus 3000 系列升级到 7.0 ( 3 ) i7 ( 7 )或 7.0 ( 3 ) i7 ( 8 )版时,它将重新加载并显示交换机启动提示符。
  • 出现以下错误:
Trim files after extracting TOR files ...
error while upgrading the firmware
/mnt/cfg/1 dir return 32 <<<<<<<<<<<<<<<<<<<<<

Config partitions are not partitioned properly.\nDisk will be re-initialized. <<<<<<<<<<<<<<<<<<<<<
 
switch(boot)#
 
然后显示提示符
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.