跳转到主内容

在对受支持的 CN1610 交换机进行 ONTAP 升级后,报告了不受支持的 switch_alert

Views:
6
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 升级
  • ONTAP 9.8
  • CN1610
  • FastPath 版本( 1.3.0.3 )

问题描述

  • ONTAP 从 9.7Px 升级到 9.8Px
  • 立即触发并清除 EMS 警报:

cshmd: hm.alert.raised:alert]: Alert Id = UnsupportedSwitch_Alert , Alerting Resource = Clusterswitch1 raised by monitor ethernet-switch
cshmd: hm.alert.cleared:notice]: Alert Id = UnsupportedSwitch_Alert , Alerting Resource = Clusterswitch1 cleared by monitor ethernet-switch
cshmd: hm.alert.raised:alert]: Alert Id = UnsupportedSwitch_Alert , Alerting Resource = Clusterswitch2 raised by monitor ethernet-switch
cshmd: hm.alert.cleared:notice]: Alert Id = UnsupportedSwitch_Alert , Alerting Resource = Clusterswitch2 cleared by monitor ethernet-switch

  • 集群运行状况监控器更正操作报告:

::>system health alert definition show -node <nodename> -monitor cluster-switch -alert-id UnsupportedSwitch_Alert

            Node: <node name>
          Monitor: cluster-switch
       Class of Alert: UnsupportedSwitch_Alert
     Severity of Alert: Major
       Probable Cause: Configuration_error
Probable Cause Description: Unsupported cluster switch is detected.
      Possible Effect: Communication problems and cluster connectivity issues occur.
     Corrective Actions: Unsupported cluster switch "$(cluster_switch_support.device)" found. Connect a supported cluster switch to cluster network.
       Subsystem Name: Switch-Health

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device