跳转到主内容

交换机端口 "x" 运行状况不正常 / 交换机端口 "x" 出现错误

Views:
26
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用场景

  • 光纤通道协议( FCP )
  • SAN
  • Brocade
  • Cisco

 

问题描述

Brocade/Cisco 中的交换机端口运行状况不正常,或者交换机端口出现多个错误。

  • 交换机日志( Brocade ):
 2020/03/10-10:20:06, [C4-1010], 13033, SLOT X CHASSIS, CRITICAL, Brocade_XX-X, X,X: Above normal hardware errors were observed: fault1:0x64, fault2:0x64 thresh2:0xb0000064.2019/06/01-08:39:16, [C3-1014], 74, CHASSIS, WARNING, xxxxx, Link Reset on Port Sx,Px(x) vc_no=0 crd(s)lost=x auto trigge 
  • 交换机日志( Cisco ):

2020 Aug 25 04:26:00 %PORT-5-IF_DOWN_NOS_RCVD: %$VSAN 451%$ Interface fc1/13 is down (NOS received)

  • 低 Tx 或 Rx 功率值:
 
RX Power:    -40.0   dBm (0.1  uW)   31.6   uW  1258.9 uW  31.6   uW   794.0  uW
TX Power:    -2.2    dBm (600.1 uW)  126.0  uW  1258.9 uW  251.0  uW   794.0  uW
 
  • 性能问题:
 2020/05/19-20:08:21, [AN-1010], 687622, FID 128, WARNING, XXXX, Severe latency bottleneck detected at slot 0 port 
 
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device