跳转到主内容

SwitchCommunityStringAlert、因为集群网络交换机上的社区字符串无效或缺失

Views:
27
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9
  • AFF
  • FAS
  • 集群网络交换机
    • CN1610
    • Cisco Nexus交换机

问题描述

  • 重新启动FAS/AFF后 SwitchCommunityString_Alert、集群交换机运行状况监控器(Cluster Switch Health Monitor、CSHM)将触发运行状况警报。
  • 此操作将生成以下 Active IQ 通知:

HA Group Notification (Health Monitor process cshm: SwitchCommunityString_Alert[switch01]) ALERT

  • system health subsystem show将交换机运行状况子系统报告为已降级。

Cluster::> system health subsystem show
Subsystem      Health
----------------- ------------------
SAS-connect     ok
Environment     ok
Memory       ok
Service-Processor ok
Switch-Health    degraded

  • system health alert show命令将显示以下错误:

Cluster::> system health alert show
        Node: Node-04
      Resource: cluster-sw-01(serial-number)
      Severity: Major
   Indication Time: Wed Sep 14 13:45:36 2022
      Suppress: false
        Acknowledge: false
   Probable Cause: Ethernet switch "Cluster-sw-01(serial-number)" with IP
           address "10.XX.XX.XX" is not reachable via SNMP.
           Incorrect SNMP community string might be configured on the Ethernet switch.
   Possible Effect: Ethernet switch communication problems and accessibility issues.
 Corrective Actions: Check the SNMP community string on the Ethernet switch
           to verify that the expected community string is configured.
                   Use the "system switch ethernet show -snmp-config" command to view the expected
                     community string.

  • CSHM-SWITCH-CONFIG.XML 通过 ASUP 显示以下错误。

Switch Monitoring Status: false
Reason For Not Monitoring:Invalid SNMP Settings

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.