跳转到主内容

升级后、Brocade交换机无法使用新固件启动

Views:
6
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade<a>2009-281399</a>
Last Updated:

适用场景

Brocade光纤通道(FC)交换机

问题描述

从8.2.3版升级到9.0.1D版后、FOS版本显示的是旧版本、而不是最新版本。

Switchxxx:admin> version
Kernel:     2.6.34.6
Fabric OS:  v8.2.3
Made on:    Wed Feb 24 20:04:13 2021
Flash:      Mon Jan 24 08:52:08 2022
BootProm:   3.0.32

firmwareshow -v 显示二级分区已升级到最新版本、而主分区仍显示旧版本、并且存在一条警告firmwaredownloadstatus、指出尽管显示固件已下载、但固件下载仍在进行中。

Switchxxx:admin> firmwareshow -v
Appl    Primary/Secondary Versions
------------------------------------------
FOS    v8.2.3
     v9.0.1d
WARNING: Firmwaredownload is in progress.
Switchxxx:admin> 
Switchxxx:admin>firmwaredownloadstatus
[1]: Tue Aug 30 10:00:54 2022
Firmware is being downloaded to the switch. This step may take up to 30 minutes.
[2]: Tue Aug 30 10:08:28 2022
Firmware has been downloaded to the secondary partition of the switch.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.