跳转到主内容

错误: 100G 光纤收发器不支持 10g-4x 的分支映射

Views:
3
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9
  • Cisco Nexus ( NX ) 3232C 集群网络交换机
  • 参考配置文件( RCF )
 

问题描述

interface Ethernet1/30
interface Ethernet1/31
interface Ethernet1/32
interface Ethernet1/33
interface Ethernet1/34
 

 

  • 交换机日志错误:
cs2# copy Nexus-3232C-RCF-v1.8-Cluster-Breakout.txt running-config ec ho-commands
`cs2# config terminal`
`cs2(config)# banner motd #`
`cs2(config)# interface breakout module 1 port 1-3 map 10g-4x`
Error: Breakout map of 10g-4x is not supported on a 100G optic transceiver
...
...

`cs2(config)# interface e1/1/1-4, e1/2/1-4, e1/3/1-4, e1/4/1-4, e1/5/1-4, e1/6/1-4, e1/7-30, e1/33-34`
                                                                                                   ^
Invalid range at '^' marker.
`cs2(config)# inherit port-profile CLUSTER`
               ^
% Invalid command at '^' marker.
`cs2(config)# priority-flow-control mode auto`
...
...
 
  • 错误将持续到 RCF 行完成:
% Invalid command at '^' marker. 
`cs2# end`
`cs2# end`
Copy complete, now saving to disk (please wait)...
Copy complete.
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device