初始化Cisco Nexus 3132Q-V交换机后出现集群互连可访问性问题

最后更新
另存为PDF

Views:: 1

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: network<a>FSE</a>

Last Updated:

适用场景

Cisco Nexus 3132Q-V

问题描述

在首次安装或更换Cisco Nexus 3132Q-V交换机后、必须在两个交换机之间传输的端口之间的第2层可访问性将失败。

使用 cluster ping-cluster 命令：

cluster1::> set -privilege advanced

Warning: These advanced commands are potentially dangerous; use them only when directed to do so by NetApp personnel. Do you want to continue? {y|n}: y

cluster1::*> cluster ping-cluster -node cluster1-01 Host is cluster1-01 Getting addresses from network interface table...

Ping status: .... Basic connectivity succeeds on 2 path(s) Basic connectivity fails on 2 path(s)

使用网络端口可访问性showcomand：

cluster1::> network port reachability show -expected-broadcast-domain Cluster:Cluster Node Port Expected Reachability Reachability Status --------- -------- ------------------------------------ --------------------- cluster1-01 e0e Cluster:Cluster ok e0f Cluster:Cluster no-reachability