跳转到主内容

Brocade交换机上的portstatshow命令输出中的"Tim txcrd_z"是什么意思?

Views:
44
Visibility:
Public
Votes:
0
Category:
thirdparty
Specialty:
brocade<a>2009-175213</a>
Last Updated:

适用场景

  • Brocade SAN交换机
  • 耗电缓慢

问题解答

  • portstatshow命令输出中的"Tim_txcrd_z"(time TX Credit Zero (2.5U ticks))参数表示以下含义:
    • 端口由于传输BB (缓冲区到缓冲区)信用值为零而无法传输帧的次数。
    • 此统计信息的目的是检测拥塞或受延迟影响的设备。
    • 此参数的采样间隔为2.5微秒、如果条件为true、计数器将递增。每个样本表示零Tx BB信用值的2.5微秒时间。
    • 此计数器的增量表示在2.5微秒内无法将帧发送到连接的设备、表示性能下降。
  • 要识别慢速消耗设备、请执行以下操作:
  • 对于单个链路;

将计数器"stat_ftx"和"Tim txcrd_z"计数器放在以下计算中。
tim_txcrd_z /帧Tx = YYY * 100 = ZZZ %

  • 对于中继链路:

将stat_ftx中继的所有成员与单个Tim_txcrd_z计数器的总和相加、并将其置于以下计算中:
tim_txcrd_z /(所有成员帧的总和)= YYY * 100 = ZZZ %

注意:中继显示的计数器不同。The tim_txcrd_z计数器在每个中继成员上是相同的、这将显示逻辑 tim_txcrd_z (所有成员一起)。 stat_ftx 计数器在每个中继成员上是不同的、并按每个成员显示计数器。

根据Brocade性能准则、接近10%或更高的比率应视为红色标记、超过20%将成为真正的问题描述 、需要进一步调查。

追加信息

附加信息 _text
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.