跳转到主内容

无法通过 SSH/Telnet 访问 Brocade 交换机

Views:
12
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
san
Last Updated:

 

适用于

  • Brocade 交换机

问题

  • 无法通过 SSH 或 Telnet 连接到 Brocade 交换机。
  • ipFilter -show 输出确认允许 TCP 端口 22 ( SSH )和 TCP 端口 23 ( Telnet )流量。

ipfilter --show     :

Name: default_ipv4, Type: ipv4, State: active
Rule   Source IP            Protocol   Dest Port   Action
1    any                       tcp    22    permit
2    any                       tcp    23    permit
3    any                       tcp     80    permit
4    any                       tcp    443    permit
5    any                       udp    161    permit
6    any                       udp    123    permit
7    any                       tcp    600 - 1023    permit
8    any                       udp    600 - 1023    permit

Name: default_ipv6, Type: ipv6, State: active
Rule   Source IP            Protocol   Dest Port   Action
1    any                       tcp    22    permit
2    any                       tcp    23    permit
3    any                       tcp     80    permit
4    any                       tcp    443    permit
5    any                       udp    161    permit
6    any                       udp    123    permit
7    any                       tcp    600 - 1023    permit
8    any                       udp    600 - 1023    permit

  • 错误转储报告以下错误:

2020/10/18-13:54:23, [SEC-1329], 67993, FID 128, ERROR, switch1, IPFilter enforcement:Failed to enforce ipfilter policy of IPV4 type because of -24.

2020/10/18-13:54:23, [SEC-1329], 67994, FID 128, ERROR, switch1, IPFilter enforcement:Failed to enforce ipfilter policy of IPV6 type because of -24.

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support