在对受支持的 CN1610 交换机进行 ONTAP 升级后，报告了不受支持的 switch_alert
适用场景
- ONTAP 升级
- ONTAP 9.8
- CN1610
- FastPath 版本（ 1.3.0.3 ）
问题描述
- ONTAP 从 9.7Px 升级到 9.8Px
- 立即触发并清除 EMS 警报：
cshmd: hm.alert.raised:alert]: Alert Id = UnsupportedSwitch_Alert , Alerting Resource = Clusterswitch1 raised by monitor ethernet-switch
cshmd: hm.alert.cleared:notice]: Alert Id = UnsupportedSwitch_Alert , Alerting Resource = Clusterswitch1 cleared by monitor ethernet-switch
cshmd: hm.alert.raised:alert]: Alert Id = UnsupportedSwitch_Alert , Alerting Resource = Clusterswitch2 raised by monitor ethernet-switch
cshmd: hm.alert.cleared:notice]: Alert Id = UnsupportedSwitch_Alert , Alerting Resource = Clusterswitch2 cleared by monitor ethernet-switch
- 集群运行状况监控器更正操作报告：
::>system health alert definition show -node <nodename> -monitor cluster-switch -alert-id UnsupportedSwitch_Alert
Node: <node name>
Monitor: cluster-switch
Class of Alert: UnsupportedSwitch_Alert
Severity of Alert: Major
Probable Cause: Configuration_error
Probable Cause Description: Unsupported cluster switch is detected.
Possible Effect: Communication problems and cluster connectivity issues occur.
Corrective Actions: Unsupported cluster switch "$(cluster_switch_support.device)" found. Connect a supported cluster switch to cluster network.
Subsystem Name: Switch-Health