跳转到主内容

是否应修改 RCF v1.8 以设置 Cisco 交换机的端口速度？

  1. 最后更新
  2. 另存为PDF
Views:
2
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009 年 122325</a>
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9
  • Cisco 集群交换机

问题解答

RCF版本1.6和1.8的端口设置为自动协商速度、无需指定。

追加信息

横幅的示例更改了显示端口速度的位置。
 
923300 YC上的RCF 1.0.2
Nexus 92300YC Reference Configuration File (RCF) v1.0.2 (10-19-2018)                                                                                    
Ports 1/1  - 1/48: 10GbE Cluster Node Ports                                                        
Ports 1/49 - 1/64: 40/100GbE Cluster Node Ports                          
Ports 1/65 - 1/66: 40/100GbE Cluster ISL Ports  
 
在92300YC上运行RCF 1.8
NetApp Reference Configuration File (RCF)
*  
* Switch   : Nexus N9K-C92300YC
* Filename : Nexus-92300YC-RCF-v1.8-Cluster.txt
* Date     : 11-01-2011
* Version  : v1.8
*
* Port Usage:
* Ports  1-64: 10/25/40/100GbE Intra-Cluster/HA Ports, int e1/1-64
* Ports 65-66: Intra-Cluster ISL Ports, int e1/65-66
*  
* This RCF supports Clustering, HA, RDMA, and DCTCP using a single port profile.                                                   
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.