跳转到主内容

Brocade 控制处理器 (CP) 刀片式服务器出现故障、高可用性( HA )是非冗余的

Views:
107
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用场景

  • Brocade (DCX)
  • Brocade (DCX-4S)
  • Brocade DCX-8510-4
  • Brocade DCX-8510-8
  • Brocade (X6-4)
  • Brocade (X6-8)

问题描述

  • 备用CP刀片式服务器发生故障、从而导致HA非冗余或不同步。
  • errdump -a 输出将刀片标记为故障、hashow并确认高可用性未运行。

示例

Switchname:admin> errdump -a

2020/03/23-14:16:38, [EM-1033], 2226, SLOT 6 | CHASSIS, ERROR, switchname, CP in Slot 7 set to faulty because CP ERROR asserted.

2020/03/23-14:16:53, [EM-1047], 2227, SLOT 6 | CHASSIS, INFO, switchname, CP in slot 7 not faulty, CP ERROR deasserted.

2020/03/23-14:20:03, [EM-1033], 2228, SLOT 6 | CHASSIS, ERROR, switchname, CP in Slot 7 set to faulty because CP ERROR asserted.

2020/03/23-14:20:18, [EM-1047], 2229, SLOT 6 | CHASSIS, INFO, switchname, CP in slot 7 not faulty, CP ERROR deasserted.
2022/07/26-09:18:24, [FSSM-1003], 21471, SLOT 1 | CHASSIS, WARNING, switchname, HA State out of sync.

 

Switchname:admin> hashow   
 Local CP (Slot 6, CP0): Active, Warm Recovered   
 Remote CP (Slot 7, CP1): Non-Redundant   

/fabos/cliexec/hadump:
---------------------------------------
TIME_STAMP: Jul 27 10:16:34.770774
---------------------------------------
Local CP (Slot 1, CP0): Active, Cold Recovered
Remote CP (Slot 2, CP1): Non-Redundant

 

/fabos/cliexec/slotshow -m:

Slot   Blade Type     ID    Model Name     Status 
--------------------------------------------------
  1     CP BLADE    175     CPX6           ENABLED
  2     CP BLADE    175     CPX6           FAULTY (53) - possible RRD
  3     SW BLADE    178     FC32-48        ENABLED
  4     SW BLADE    178     FC32-48        ENABLED
  5     CORE BLADE  176     CR32-4         ENABLED
  6     CORE BLADE  176     CR32-4         ENABLED
  7     UNKNOWN                            VACANT
  8     AP BLADE    186     SX6            ENABLED

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.