跳转到主内容

什么是 CRC 错误以及如何通过运行任何版本 Fabric OS 的 FC 和 Brocade 交换机解决这些错误

Views:
54
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

状态信息

适用场景

  • Brocade交换机
  • 光纤通道
  • Cyclic Redundancy Check(循环冗余校验)(CRC)

问题描述

porterrshow 显示增加 crc err


frames    enc   crc   crc   too   too   bad   enc   disc   link   loss   loss   frjt   fbsy  c3timeout
    tx    rx    in   err   g_eof  shrt   long   eof    out   c3   fail   sync   sig          tx   rx
======================================================================================================================= 
  0:   7.5m   8.7m   0    0    0    0    0    0   316    30    4   506   612    0    0    0    0   
  1:   3.2g 716.8m   0    11    11    0    0    0    19    14    8    11    14    0    0    0    0   
  2:  415.9m   3.4g   1.7m 121.8k  84.2k  85    0    37.5k  59.8k   1.5k   6    9    12    0    0    1.5k   0   

注: 连接的设备 可能会出现断开连接和/或 延迟增加的情况

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.