跳转到主内容

AFF/FAS 重新启动后的 "Switch is Unreachable over Management Network" (无法通过管理网络访问交换机) 在 ONTAP 9.6 及更高版本中

Views:
15
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

适用于

  • ONTAP 9.6 及更高版本
  • 重新启动后
    • 正常重新启动
    • 硬件更换
    • ONTAP 升级

问题

  • 重新启动 ONTAP 交换机后,监控失败
 cluster::>storageswitchshow -error Switch Name: Cisco_10.226.197.34 Switch WWN: 2000547fee78f088 ------------------------------------------------------------------------------- Cisco_10.226.197.34(2000547fee78f088): Switch is Unreachable over Management Network. Switch Name: Cisco_10.226.197.35 Switch WWN: 2000547fee78f0f0 ------------------------------------------------------------------------------- Cisco_10.226.197.35(2000547fee78f0f0): Switch is Unreachable over Management Network. Switch Name: Cisco_10.226.197.36 Switch WWN: 2000547fee78efb0 ------------------------------------------------------------------------------- Cisco_10.226.197.36(2000547fee78efb0): Switch is Unreachable over Management Network. Switch Name: Cisco_10.226.197.37 Switch WWN: 2000547fee78f0d8 ------------------------------------------------------------------------------- Cisco_10.226.197.37(2000547fee78f0d8): Switch is Unreachable over Management Network. 4 entries were displayed.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.