跳转到主内容

打开电源后, ONTAP 驱动器 X358_TPM4V3T8AME 出现故障,并显示 " 故障 - 不支持 "

Views:
8
Visibility:
Public
Votes:
0
Category:
disk-drives
Specialty:
hw
Last Updated:

适用于

  • FAS 系统
  • AFF 系统
  • SSD 驱动器— X358_TPM4V3T8AME

问题描述

某些客户在驱动器从存储中取出并重新利用后,在启动驱动器后遇到了多个驱动器故障。 

  • 本文仅讨论 X358_TPM4V3T8AME 驱动器。 
  • 驱动器在启动后将失败, "Failed-Unsupported" 并在 sysconfig -a 中显示错误:

system node run -node <nodename> -command sysconfig -a

 12.0 : NETAPP X358_TPM4V3T8AME NA01 0.0GB 0B/sect (Failed-Unsupported) 12.1 : NETAPP X358_TPM4V3T8AME NA01 0.0GB 0B/sect (Failed-Unsupported) 12.2 : NETAPP X358_TPM4V3T8AME NA01 0.0GB 0B/sect (Failed-Unsupported) 12.3 : NETAPP X358_TPM4V3T8AME NA01 0.0GB 0B/sect (Failed-Unsupported) 12.4 : NETAPP X358_TPM4V3T8AME NA01 0.0GB 0B/sect (Failed-Unsupported) 12.5 : NETAPP X358_TPM4V3T8AME NA01 0.0GB 0B/sect (Failed-Unsupported) 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device