跳转到主内容

使用 SP 固件 5.8 的 FAS8200 上的 SPLinkDownAlert

Views:
6
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • FAS8200
  • 服务处理器( SP )固件版本: 5.8
  • SP 内部交换机版本: Version16-SB_XXII-ETHSW-RZL

问题描述

  • 系统报告 SPLinkDownAlert 消息:

示例:

Mon May 24 05:19:47 CST [Hostname: nphmd: hm.alert.raised:alert]: Alert Id = SPLinkDownAlert, Alerting Resource = SP Config raised by monitor controller

  • E0M 链路已启动, SP 处于联机状态,而 sysconfig -a 中没有 IP 地址:

示例:

Service Processor           Status: Online
 Firmware Version:   5.8
  Mgmt MAC Address:  
  Ethernet Link:     down, full duplex, auto-neg complete
  Using DHCP:         no
 IPv4 configuration:
  IP Address:         unknown
  Netmask:            unknown
  Gateway:            unknown
 IPv6 configuration:         Disabled

slot 0: Gigabit Ethernet I210
  e0M MAC Address:    (auto-1000t-fd-up)
  Device Type:        1533
  Firmware Version:   3.25-5.5 0x80000674

  • SP 内部交换机版本为 16-SB_XXII-ETHSW-RZL 。

"sp-latest-configuration" 中的示例:

Check revision of programmable devices with revision of images bundled in SP (/usr/local/bin/check_fw_revision.sh)
==================================================
Versions that do not match will be printed.
==================================================
Ethernet switch version
==================================================
Version16 SB_XXII ETHSW RZL

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support