端口在"network port show"和"ifstat -a"中报告的端口速度10Gbps不正确、而不是1Gbps

适用场景

• FAS
• ONTAP 9

问题描述

• 端口e0c、e0d、e0e在"network port show"和"ifstat -a中显示为10 Gbps、而不是1 Gbps。

network port show:

Node: node-1
Speed(Mbps) Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------
---------------- ---- ---- ----------- --------
e0c Default - up 1500 auto/10000 healthy　
e0d Default - up 1500 auto/10000 healthy　
e0e Default fogrp 410 up 1500 auto/10000 healthy　

 

ifstat -a:

-- interface  e0c  (1 day, 9 hours, 36 minutes, 15 seconds) --
LINK INFO
Speed:      10000M | Duplex:       full | Flowcontrol:     none
-- interface  e0d  (1 day, 9 hours, 36 minutes, 14 seconds) --
LINK INFO
 Speed:      10000M | Duplex:       full | Flowcontrol:     none
-- interface  e0e  (1 day, 9 hours, 36 minutes, 15
LINK INFO
 Speed:      10000M | Duplex:       full | Flowcontrol:     none

• "sysconfig -a"和"ifconfig-vvvm"工作正常。

sysconfig -a:

   slot 0: 1/10 Gigabit Ethernet Controller IX4-T
     e0e MAC Address:   d0:39:ea:1d:ab:d4 (auto-1000t-fd-up)
     e0f MAC Address:   d0:39:ea:1d:ab:d5 (auto-unknown-fd-down)
     e0c MAC Address:   d0:39:ea:1d:ab:d2 (auto-1000t-fd-up)
     e0d MAC Address:   d0:39:ea:1d:ab:d3 (auto-1000t-fd-up)

ifconfig-vvvm:

e0c: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)
e0d: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)
e0e: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)