跳转到主内容

从管理启动的 LIF Ping 到网关失败,但在迁移到其他端口时有效

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

适用场景

  • FAS 
  • AFF
  • ONTAP 9

问题描述

  • 从管理员启动的 LIF 对网关执行 Ping 操作失败。

cluster1::> network interface show -vserver svm1
       Logical   Status    Network       Current     Current Is
Vserver    Interface  Admin/Oper Address/Mask     Node      Port   Home
----------- ---------- ---------- ------------------ ------------- ------- ----
svm1
       lif1    up/up   10.xx.xx.10/24    node-1     e0c    true

cluster1::> network route show -vserver svm1
Vserver        Destination    Gateway      Metric
------------------- --------------- --------------- ------
svm1
           0.0.0.0/0     10.xx.xx.1    10

cluster::> network ping -lif lif1 -vserver svm1 -destination 10.xx.xx.10
no answer from 10.xx.xx.1

  • 问题描述在放弃 LIF 和端口后仍然存在。
  • 数据包跟踪显示端口不会在 ping 时发送任何 ARP 请求。
  • 即使在重新拔插缆线后,问题描述仍存在。
  • 将 LIF 迁移到其他某个端口后, ping 将成功。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.