跳转到主内容

DS2246 和 FAS2240 上的操作面板 / 显示面板失败

Views:
55
Visibility:
Public
Votes:
0
Category:
data-ontap-7
Specialty:
hw
Last Updated:

适用于

Data ONTAP 7-模式

问题

  • 控制器上的琥珀色指示灯亮起,并显示相应的 EMS 消息
    • DS2246 (S/N xxxxxxxxxx) shelf 0 on channel 0a display warning for Display 1: not installed or failed; display panel failed. This module is on the front side of the shelf, at the left. Fault reported on disk storage shelf attached to channel 0a. Please check fans, power supplies, disks, and temperature sensors.

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.